|
ALL - TERRAIN
URETHANE WHEEL CHOCKS
Roadblocks All-Terrain Urethane Wheel Chocks are specifically designed for use on fire equipment.
They comply with NFPA 1901-1094 and meet SAE-J348 standard for up to 32 inch and to 44 inch wheel diameters.
These tough, damage resistant polyurethane chocks are resistant to oils, fuels and solvents, and feature high strength aluminium base plates with posi-grip traction cleats or anti-slip rubber traction pads.
For added safety and convenience, Lewden incorporates a moulded carrying handle and safety colours for easy identification.
2512 SERIES
| MODEL |
BASE DESIGN |
LENGHT |
WIDTH |
HEIGHT |
CLR |
WEIGHT |
| AT2512-AC-Y |
Aluminum Cleat |
15.5 in. (394 mm) |
8.5 in. (216 mm) |
8.25 in. (210 mm) |
Yellow |
9 lbs (4.1 kg) |
| AT2512-AC-R |
Aluminum Cleat |
15.5 in. (394 mm) |
8.5 in. (216 mm) |
8.25 in. (210 mm) |
RED |
9 lbs (4.1 kg) |
| Wheel Chocks comply with NFPA 1901-1904 and meet SAE-J348 Standard for up to 32 in. (810mm) wheel diameter |
|
|
MOUNTING BRACKET
| MODEL |
DESCRIPTION |
COATING |
WEIGHT |
| AT2512VM |
Vertical Mounting Bracket for Model 2512 Chock |
Zinc Plated |
4 lbs. (1.8 kg) |
| AT2512HM |
Horizontal Mounting Bracket for Model 2512 Chock |
Zinc Plated |
4.25 lbs. (1.9 kg) |
| Horizontal bracket may be mounted under tha vehical or in an apparatus compartment |
|
 |
2514 SERIES
| MODEL |
BASE DESIGN |
LENGHT |
WIDTH |
HEIGHT |
CLR |
WEIGHT |
| AT2514-AC-Y |
Aluminum Cleat |
21 in. (533 mm) |
11.25 in. (288 mm) |
12.25 in. (311 mm) |
Yellow |
22 lbs (10 kg) |
| AT2514-AC-R |
Aluminum Cleat |
21 in. (533 mm) |
11.25 in. (288 mm) |
12.25 in. (311 mm) |
RED |
22 lbs (10 kg) |
| AT2514-RP-Y |
Rubber Pad |
21 in. (533 mm) |
11.25 in. (288 mm) |
12.25 in. (311 mm) |
Yellow |
22 lbs (10 kg) |
| AT2514-RP-R |
Rubber Pad |
21 in. (533 mm) |
11.25 in. (288 mm) |
12.25 in. (311 mm) |
RED |
22 lbs (10 kg) |
| Wheel Chocks comply with NFPA 1901-1904 and meet SAE-J348 Standard for up to 44 in. (1120mm) wheel diameter |
| |
MOUNTING BRACKET
| MODEL |
DESCRIPTION |
COATING |
WEIGHT |
| AT2514VM |
Vertical Mounting Bracket for Model 2514 Chock |
Zinc Plated |
4.75 lbs. (2.2 kg) |
| AT2514HM |
Horizontal Mounting Bracket for Model 2514 Chock |
Zinc Plated |
5 lbs. (2.3 kg) |
| Horizontal bracket should be mounted in an apparatus compartment and not under the vehicle |
|
|
|